Quickstart
Step 1
Attach the corners to your print
1
Remove liner
Peel off the release film and attach the corner brackets in every corner.
2
Add the corner brackets
Leave 2-5mm from the sides.
3
Press lightly
Apply a light pressure to fix the corner.
Step 2
Set up your SwapFrame
1
Add magnets
Adhere the magnets to the two Tee parts.
2
Assemble the components
Put the components in the aluminium profiles.
3
Tension your print
Pull one of the side bars back to apply tension and lock it into the corners.
Step 3a
Hang your Masterprint (magnetically)
1
Add mounting plates
Add the mounting plates to the frame, add tape strips, and remove liner.
2
Put it on your wall
Press your Masterprint with mounting plates onto your wall.
3
Remove and firmly press
Slide down your Masterprint and firmly press the mounting plates onto your wall.